Stamping nail art requires an image plate to create fabulous designs on the fingernails. Numbers of designs are engraved over the nail design plate. To draw design over nails using nail design plate, it is necessary to apply sufficient polish on the image. It is also important to remove immediately the excess polish on the image on nail design plate because once the polish dries, it is difficult to place stamp over the image. Excess polish should be perfectly removed with the help of scraper. Starching of nail design plate doesn't affect the durability of a nail design plate.
After removing excess polish, press or roll the stamp over image firmly that will confirm the fixing of stamp over the image. Once the image from a nail design plate gets transferred to the stamp then immediately push the stamp over nails at right place. It is necessary to apply stamp immediately over nail because as time passes the image at the stamp dries which makes it unable to get fixed on the nail.
The nail paint used in stamping nail art is bit thick. While applying a top coat, take care that nail paint will not come in contact with the design. If nail paint come in contact with the design, it may destroy the beauty of the design. If such happens then don't try redoing whole process again, let top coat dry; after it dries up, apply another coat.
After doing all above process, the nail design plate, scraper and stamp must be cleaned using nail paint remover. If nail design plate is not clean then it becomes difficult to transfer design from image plate. If design is not getting transferred properly from the nail design plate to a nail or stamp, then use nail filer to fill the stamper slightly.